The device folds easily and while folded takes up very little space. Many professional sharpeners got used to the fact that sharpening machines are either bulky stationary systems or very simple pocket devices. We are changing the concept of the professional sharpening. TSPRF Blitz is completely made of metal, like the large TSPROF K03 and got the same high accuracy but with the size slightly larger than a cup of tea. Modern processing methods and the reduction of the size of the turning mechanism allowed us to produce parts with high accuracy in a single technological cycle.
V.C. system Angleset - convenient angle setting. The minimum sharpening angle is 8 ° to the side, and the maximum is more than 25 °. The optimal geometric dimensions of the angular joints of the kinematic scheme of the sharpener can minimize the weight of the abrasive holder. Flat abrasive, leaning on the cutting edge in working position always stays in the horizontal plane and does not change its orientation almost in the entire range. This becomes especially important at the final stages of sharpening, when it is necessary to control the "fluent" touch of the abrasive, excluding the influence of dynamic loads from the movement of the abrasive holder during sharpening. Convenient rotation handle gives a quick and uniform change of the angle, leaving the abrasive in place and creating good conditions for controlling the blade.
TSPROF Blitz got all advantages of a clamping frame mount with two independent clamps variable connected to the frame and facilitated 180 ° rotation without reinstalling the knife We have kept the famous swivel mechanism with all the advantages of a clamping frame with two independent clamps. Two clamps made from construction steel reliably clamp knives with blade up to 200 mm. The whole-milled clamping frame is securely fixing at the working position, the revolution occurs with light pressing of the rotation lever